Bambu Lab P2S
Bambu Lab H2S
Your Personal Manufacturing Hub
- 340*320*340 mm³ Print Volume
- Multi-color 3D Printing
- Closed-loop Servo Motor Extruder
- Optional 10W Laser and Cutting Module
- 5μm Resolution Optical Motion Calibration
- 350°C Nozzle & 65°C Active Chamber Heating
- Full Filament Path AI Detection
Bambu Lab P2S
The Icon, Redefined.
- 5-Inch Touch Screen
- AI Failure Detection
- Auto Flow Dynamics Calibration
- Multi-Color Printing
- Cold-Air Cooling
- Active Venting Filament Drying
- 256*256*256 mm³ Print Volume
Get the Highlights
The Icon in
Action
Hub
The User Experience As Good As A Smartphone.
The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.
5-inch Touch Screen | 2nd-Gen UI
70% More Extrusion Force & Real-Time Error Detection.
PMSM Servo Architecture | DynaSense Extruder
The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.
Print Smooth At Every Corner, Always.
Active Flowrate Compensation | Eddy Current Pressure Sensor
The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.
Adaptive Airflow System
Perfect Overhang
No Matter the Filament or Temperature.
Cold-Air Intake | Cooling Mode
Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs.
Heat Preservation | Carbon Filter
Peace Of Mind, Everytime You Print.
The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.
AI Error Detection | 2 TOPS NPU
30-Second Nozzle Swap.
The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors.
Quick Swap Hotend | 1-Clip Design
No-Lag Liveview & High-Quality Timelapse.
"Stage" Lighting | 1080P High-Rate Camera
Reliable for Fiber-Reinforced Material Printing.
Hardened Steel Nozzle | Hardened Steel Extruder Gear
AMS 2 Pro
Multi-Color Printing & Filament Drying, All in One Box.
Auto Venting Filament Drying | Multi-Color Printing
Electromagnetic Air Vent
Faster Multi-Color Printing
Perfection, Detail by Detail.
Auto Venting Filament Drying | Multi-Color Printing
AMS, Evolved.
The all-new 2nd-generation AMS systems, including the AMS 2 Pro and AMS HT, feature brushless servo feeding motors that significantly boost filament feeding efficiency, accelerating multi-color and multi-material printing. Even better, the 2nd-generation AMS introduces a filament dryingfunction with active air vent on a fully sealed system, greatly enhancing drying efficiency and maintaining optimal filament conditions for extended periods.
Bambu Lab AMS 2 Pro
Bambu Lab AMS HT
Speed Up! Faster Multi-Material Printing!
Electro-Magnetic Air Vent
Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.
Auto-Rotate Drying
Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.
RFID Sync
Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.
Dry Filament Quickly and Intelligently
+60%
Powerful Bambu permanent magnet synchronous servo motor sped-up the filament feeding by 60%
-10 min
Average 10min saved per 100 filament changes
Faster multi-color printing
Evolved, Polished Design Details
Tool-Free Filament Tubes Access
Removing snapped filament from the first-gen AMS requires extracting all spools and disassembling the shell with two screws, taking 3-5 minutes. In contrast, the AMS 2 Pro offers direct, tool-free access to filament tubes from the top.
Ceramic Inlet
Ceramic filament inlets with Vickers hardness of 1200 significantly enhances durability.
Integrated Ecosystem,
End-to-End Support
Software Ecosystem
Control & Browse From Any Device, Anywhere
Bambu Lab Academy
Master Your Printer with Easy-to-follow Lessons
Bambu Lab Wiki
Find Answers to Every Printing Problem
Bambu Lab P Series Comparison
P2S
The All-Round Best Value Workhorse
P1S
A Reliable Workhorse
Body
Build Volume: 256*256*256 mm³
Materials: Plastic, Glass and Steel
Build Volume: 256 x 256 x 256 mm³
Shell: Plastic & Glass
Toolhead
Extruder Gears: Hardened Steel
Nozzle: Hardened Steel
Extruder Gears: Steel
Nozzle: Stainless Steel
Heatbed
Max Build Plate Temperature: 110 ℃
Max Build Plate Temperature: 100 ℃
Cooling
Part Cooling Fan: Closed Loop Control
Hot End Fan: Closed Loop Control
MC Board Cooling Fan: No
Auxiliary Part Cooling Fan: Closed Loop Control
Air Filter: Activated Carbon Filter
Part Cooling Fan: Closed Loop Control
Hot End Fan: Closed Loop Control
MC Board Cooling Fan:
Closed Loop Control
Chamber Temperature Regulator Fan:
Closed Loop Control
Auxiliary Part Cooling Fan:
Closed Loop Control
Air Filter: Activated Carbon Filter
Supported Filament
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF: Supported
PLA, PETG, TPU, PVA: Ideal
ABS, ASA: Ideal
PA, PC, PET: Capable
Carbon/Glass Fiber Reinforced
Polymer: Not recommended
Sensors
Filament Run Out Sensor: Yes
Filament Grinding Sensor: Yes
Power Loss Recover: Yes
Filament Tangle Sensor: Yes
Bambu Micro Lidar: No
Liveview Camera: 1920*1080 high-rate (Timelapse Supported)
Filament Run Out Sensor: Yes
Filament Odometry: Yes (With AMS)
Power Loss Recover: Yes
Filament Tangle Sensor: No
Bambu Micro Lidar: No
Chamber Monitoring Camera:
Low Rate Camera 1280 x 720
Timelapse Supported
Electronics
Display: 5-inch 854*480 Touchscreen
Connectivity: Wifi (5G&2.4G), Bambu-Bus
Storage: Built-in 8 GB EMMC and USB Port
Control Interface: Touchscreen, mobile App, PC App
LED Lighting: Included
Neural-Network Processing Unit: 2 TOPS
Display: 2.7-inch 192 x 64 Screen
Connectivity: Wi-Fi, Bluetooth,
Bambu-Bus
Storage: Micro SD Card
Control Interface: Button, APP, PC Application
Led: Included
Neural-Network Processing Unit: N/A
USB Output Power: 5 V/1.5 A
Software Update Support
Guaranteed Bugfixes and Feature Updates until: October 14, 2030
Guaranteed Security Patch Updates until: October 14, 2032
Guaranteed Bugfixes and Feature Updates until:
July 13, 2028
Guaranteed Security Patch Updates until:
July 13, 2030
What's in the box !
